Aero Type 4A 4 String Mustang Size Humcancelling Pickup

The Type 4A Mustang Pickup is an exact replacement designed with better frequency response than the original. This pickup is built using the re-issue bobbin size. Mustang pickups are series hum bucking (SHB), the same as a PB pickup. Pickup covers are not available from Aero, but the Mustang pickup will fit perfectly into your original covers.

This pickup utilizes Alnico V 1/4" pole pieces.

This pickup is intended for 16.00mm spacing measured over the pickup.

Please Note:

Aero does not provide screws with their pickups. If you need pickup screws, you can get them on the Pickup Screws page.

Click Here for Pickup Screws