Bartolini 6RT Rickenbacker 4-String Original Split Coil Neck

Bartolini 6RT Rickenbacker 4-String Original Split Coil Neck

Original Bart upgrade pickups allow you to keep the legendary "Rickenbacker tone," but without the clank and noise of the Rick's abrasive high end. They provide bottomless lows and low-mids for your Rickenbacker 4001. 6RC and 6RT have long been the industry standard pro-level upgrades for Ricks. The neck pickup is a split coil design much like a P-Bass in a single pickup. The bridge pickup is a dual coil humbucker. Both pickups are fully hum-cancelling when played solo or together. The Originals are full and warm for that vintage voice you've been craving, enhancing the natural voice of your bass. You'll never find lower tones produced with higher clarity!

Made for pro-level bass players, they are fully sealed and shielded making them sweat-proof, quiet if you touch them, and immune invisible noise from stage lights and studio power supplies. The cables are shielded too.

Specifications

• Coil Structure: 6RT - Split P Hum-killing
• Coil Structure: 6RC - Dual Coil Humbucker
• Magnetic Circuit: 2 types of precision CNC milled carbon steel, brass, and copper powered by ceramic (ferrite) magnets projected for focused aperture. Neck coil South and Bridge coil North for both positions

6RT - Neck

• DC Resistance: ~5.2KΩ
• Resonant Frequency: ~5.6KHz
• Sensing Width: 2.01" [51mm] Max

6RC - Bridge

• DC Resistance: ~4.3KΩ each coil
• Resonant Frequency: ~5.1KHz
• Sensing Width: 2.01" [51mm] Max

6R Shape

• 2.79" [70.9mm] Long, 1.1" [27.9mm] Wide, 0.67-0.77" [17-19.6mm] Thick + 0.11" [2.8mm] Cable
• Brass bracket with 6-32 tapped holes

Please Note: Bartolini does not supply screws with their pickups. If you require pickup screws, we carry them on our pickup screws page.

Click Here for Pickup Screws.