Bartolini 9S-L J-Bass 4-String Original Single Coil Bridge Pickup

Bartolini 9S-L J-Bass 4-String Original Single Coil Bridge Pickup

The original Bartolini design gives you the timeless tone that started it all ? full and warm for that vintage voice you've been craving, enhancing the natural voice of your bass. Even though they are just a single coil, they are still pro-level. The magnetic circuit projects an even field to the strings which gives you a natural voice. They have a blade core design, so you don't have to worry about string alignment. Original Barts bring out your voice, low and clear.

In the early ?70s, Bill Bartolini leveraged his deep knowledge of acoustics to create pickups that produce the most natural, musical voice from the instrument. He added shielding to block radio signals and noise. He developed a method of sealing, isolating, and stabilizing the coils so they could be encapsulated in epoxy to eliminate "microphonics" ? the nasty noise you get when you touch typical pickups.

Available in balanced specific bridge and neck versions.

Specifications

• Coil Structure: True Single
• Cable Type: Shielded Coaxial Hot Core
• Magnetic Circuit: 2 types of carbon steel powered by ceramic (ferrite) magnets. Opposite polarity for neck and bridge

9S-S - Neck

• DC Resistance: ~7.1KΩ
• Resonant Frequency: ~4KHz
• Sensing Width: 2.36" [60mm] Max

9S-L - Bridge

• DC Resistance: ~8KΩ
• Resonant Frequency: ~3.7KHz
• Sensing Width: 2.36" [60mm] Max

Standard Short J-Bass (-S)

• 3.6" [91.4mm] Long, 0.73" [18.5mm] Wide, 0.82" [20.8mm] Thick + 0.11" [2.8mm] Cable
• 4 Standard J Pickup Mounting ears for your #3 or #4 screws

Please Note: Bartolini does not supply screws with their pickups. If you require pickup screws, we carry them on our pickup screws page.

Click Here for Pickup Screws.