Bartolini BC42J-B 4-String BC Soapbar 2J Squared Neck 2+1 Drill 4-Cond

Bartolini BC42J-B 4-String BC Soapbar 2J Squared Neck 2+1 Drill 4-Cond

We started with 2 of our hugely popular 9J passive hum-cancelling Jazz bass pickups and installed them in a soapbar shell. With soapbar mounting instead of mounting ears in a nice squared shape, we created the 2J Squared Quad coil pickup. We made the J pickups work together as a dual humbucker or as a J-bass when coil-split. When wired as a series humbucker, they are big and growly with high output. When wired as a parallel humbucker, they are fat and round but with focus ? like when you have both volumes on full on a J-Bass. When wired to coil cut, they are precise and clear. And they are hum-free in all setups which can be easily chosen when you install a toggle switch. They can be used without a switch, but you get a lot more flexibility if you have one.

Because 2J Squared are have blades instead of poles, they work with a range of string spacings. They are internally shielded and are wired with shielded cables. These pro-level pickups are fully hum-killing even on the noisiest stage or studio. They are sweat-proof and won't make horrible noises when you hit them with the strings.

We make them special for neck (Bass, -B) and bridge (Treble, -T) positions so they balance well when blended together or played separately.

Specifications

• Coil Structure: Quad Coil Dual Inline Hum-killing
• Cable Type: 4-Conductor Cable with shield and bare drain
• Magnetic Circuit: 2 types of carbon steel, brass, and copper powered by ceramic (ferrite) magnets. Bass end neck coil North, Treble end neck coil South, Treble end neck coil North, and Bass end bridge coil South for both positions

BC42J-B - Neck

• DC Resistance: ~6.4KΩ each inline coil pair
• Resonant Frequency: ~6.3KHz
• Sensing Width: 2.52" [64mm] Max - 1.89" [48mm] Min

BC42J-T - Bridge

• DC Resistance: ~7KΩ each inline coil pair
• Resonant Frequency: ~6.4KHz
• Sensing Width: 2.52" [64mm] Max - 1.89" [48mm] Min

BC Soapbar

• 3.95" [100.3mm] Long, 1.26" [32mm] Wide, 0.68-0.78" [17.3-19.8mm] Thick + 0.15" [3.8mm] Cable
• 2 holes on bass end and 1 on treble end for your #4 pan head screws

Please Note: Bartolini does not supply screws with their pickups. If you require pickup screws, we carry them on our pickup screws page.

Click Here for Pickup Screws.