Bartolini BC4C 4-String BC Soapbar Original Dual Coil Pickup Set

Bartolini BC4C 4-String BC Soapbar Original Dual Coil Pickup Set

No other pickup can deliver the gigantic, luxuriant lows of Original Bart soapbars. They provide bottomless lows and low-mids, their dual coil construction eliminates the noise and muddiness that vast amounts of low-end can create. The Originals are full and warm for that vintage tone you've been craving, enhancing the natural voice of your bass. You'll never find lower tones produced with higher clarity!

Made for pro-level bass players, they are fully sealed and shielded making them sweat-proof, quiet if you touch them, and immune invisible noise from stage lights and studio power supplies. The cables are shielded too.

Available in balanced versions for neck (Bass, -B) and bridge (Treble, -T).

Specifications

• Coil Structure: Dual Parallel Humbucking
• Cable Type: 4-Conductor Cable with shield and bare drain
• Magnetic Circuit: Carbon steel, brass, and copper powered by ceramic (ferrite) magnets projected shallow for wide aperture. Neck coil South and Bridge coil North for both positions

BC4C-B - Neck

• DC Resistance: ~3.7KΩ each coil
• Resonant Frequency: ~4.4KHz
• Sensing Width: 2.36" [60mm] Max

BC4C-T - Bridge

• DC Resistance: ~5.2KΩ each coil
• Resonant Frequency: ~3.7KHz
• Sensing Width: 2.36" [60mm] Max

BC Soapbar

• 3.95" [100.3mm] Long, 1.26" [32mm] Wide, 0.68-0.78" [17.3-19.8mm] Thick + 0.15" [3.8mm] Cable
• 2 holes on bass end and 1 on treble end for your #4 pan head screws

Please Note: Bartolini does not supply screws with their pickups. If you require pickup screws, we carry them on our pickup screws page.

Click Here for Pickup Screws.