Bartolini D942J 4-String Original 2J D9 Double J-Bass Neck Pickup

Bartolini D942J 4-String Original 2J D9 Double J-Bass Neck Pickup

We started with 2 of our hugely popular 9J passive hum-cancelling Jazz bass pickups and installed them in a double-wide modern J-bass shell. We made the J pickups work together as a dual humbucker or as a J-bass when coil-split. When wired as a series humbucker, they are big and growly with high output. When wired as a parallel humbucker, they are fat and round but with focus – like when you have both volumes on full on a J-Bass. When wired to coil cut, they are precise and clear. And they are hum-free in all setups which can be easily chosen when you install a toggle switch. They can be used without a switch, but you get a lot more flexibility if you have one.

Because Original 2J pickups have blades instead of poles, they work with a range of string spacings. They are internally shielded and are wired with shielded cables. These pro-level pickups are fully hum-killing even on the noisiest stage or studio. They are sweat-proof and won’t make horrible noises when you hit them with the strings.

We make them special for neck (Bass, -B) and bridge (Treble, -T) positions so they balance well when blended together or played separately.

Specifications

• Coil Structure: Quad Coil Dual Inline Hum-killing
• Cable Type: 4-Conductor Cable with shield and bare drain
• Magnetic Circuit: 2 types of carbon steel, brass, and copper powered by ceramic (ferrite) magnets. Bass end neck coil North, Treble end neck coil South, Treble end neck coil North, and Bass end bridge coil South for both positions

D942J-B - Neck

• DC Resistance: ~6.4KΩ
• Resonant Frequency: ~6.3KHz
• Sensing Width: 2.52" [64mm] Max, 1.89" [48mm] Min

D942J-T - Bridge

• DC Resistance: ~7KΩ
• Resonant Frequency: ~6.4KHz
• Sensing Width: 2.52" [64mm] Max, 1.89" [48mm] Min

D9 Double J

• 3.72" [94mm] Long, 1.44" [37mm] Wide, 0.84" [21.3mm] Thick + 0.15" [3.8mm] Cable
• 4 Standard J Pickup Mounting ears for your #3 or #4 screws

Please Note: Bartolini does not supply screws with their pickups. If you require pickup screws, we carry them on our pickup screws page.

Click Here for Pickup Screws.