Bartolini 'Original Bass' Soapbar Quad-Coil Humcancelling

The quad coil design is splittable and features deep tone.

The "Original Series" bass pickups with passive designs. They are cast in epoxy to remove unwanted feedback and microphonics.

Please check the physical size of the pickups you want to replace to make sure the replacements fit properly.

M4 (EMG 40) – XXM45C, XXM46C “5 & 6 String” size

• XXM45C is designed for extended string width of 64 to 80mm in low-curvature fingerboards.
• XXM46C is designed for extended string width of 74 to 90mm in low-curvature fingerboards
• Pickup Length: 101.60mm (4.00")
• Pickup Width: 38.10mm (1.50")
• Click here for (Technical Drawing)

M5 (EMG 45) – XXM55C, XXM56C, “5 & 6 String” size

• XXM55C is designed for extended string width of 64 to 80mm in low-curvature fingerboards.
• XXM56C is designed for extended string width of 74 to 95mm in low-curvature fingerboards.
• Pickup Length: 114.30mm (4.50")
• Pickup Width: 38.10mm (1.50")
• Click here for (Technical Drawing)

P2 – XXP25C, XXP26C “5 & 6 String” size

• XXP25C is designed for extended string width of 64 to 80mm in low-curvature fingerboards.
• XXP26C is designed for extended string width of 74 to 90mm in low-curvature fingerboards.
• Pickup Length: 108.08mm (4.26")
• Pickup Width: 32.13mm (1.27")
• Click here for (Technical Drawing)

P2 – XXP46C, “6 String” size

• XXP46C is designed for extended string width of 74 to 95mm in low-curvature fingerboards.
• Pickup Length: 117.60mm (4.63")
• Pickup Width: 32.13mm (1.27")
• Click here for (Technical Drawing)

P5 – 96P56C, “6 String” size

• 96P56C is designed for maximum string widths of 96mm(measured over the pickup).
• Pickup Length: 127mm (5.00")
• Pickup Width: 32mm (1.25")
• Click here for (Technical Drawing)

Please Note:Bartolini does not supply screws with their pickups. If you require pickup screws, we carry them on our pickup screws page.

Click Here for Pickup Screws.