This is a demo store. No orders will be fulfilled.
Bartolini 'Original Bass' Soapbar Split-Coil Humcancelling
As low as $116.00
Only %1 left
SKU
bartolini_dt_soapbar_split_coil
*Sets and Singles availble in 4 different sizes for 5 and 6 String Basses*
The split coil design features a deep tone.
The "Original Series" bass pickups with passive designs. They are cast in epoxy to remove unwanted feedback and microphonics.
Please check the physical size of the pickups you want to replace to make sure the replacements fit properly.
M4 (EMG 40) – XXM45M, XXM46M “5 & 6 String” size
- XXM45M is designed for extended string width of 64 to 80mm in low-curvature fingerboards.
- XXM46M is designed for extended string width of 74 to 90mm in low-curvature fingerboards.
- Pickup Length: 101.60mm (4.00")
- Pickup Width: 38.10mm (1.50")
- Click here for (Technical Drawing)
M5 (EMG 45) – XXM55M, XXM56M, “5 & 6 String” size
- XXM55M is designed for extended string width of 64 to 80mm in low-curvature fingerboards.
- XXM56M is designed for extended string width of 74 to 95mm in low-curvature fingerboards.
- Pickup Length: 114.30mm (4.50")
- Pickup Width: 38.10mm (1.50")
- Click here for (Technical Drawing)
P2 – XXP25M, XXP26M “5 & 6 String” size
- XXP25M is designed for extended string width of 64 to 80mm in low-curvature fingerboards.
- XXP26M is designed for extended string width of 74 to86 mm in low-curvature fingerboards.
- Pickup Length: 108.08mm (4.26")
- Pickup Width: 32.13mm (1.27")
- Click here for (Technical Drawing)
P4 – XXP46M, “6 String” size
- XXP46M is designed for extended string width of 74 to 95mm in low-curvature fingerboards.
- Pickup Length: 117.60mm (4.63")
- Pickup Width: 32.13mm (1.27")
- Click here for (Technical Drawing)
Please Note:Bartolini does not supply screws with their pickups. If you require pickup screws, we carry them on our pickup screws page.
Write Your Own Review