Bartolini M34P 4-String M3 Shape P Soapbar Pickup

Bartolini M34P 4-String M3 Shape P Soapbar Pickup

P Soapbars have thick, deep tone with huge bass response giving you P-Bass voice in a soapbar bass. Used alone, in pairs, or with a J Soapbar, P Soapbars provide a flexible solution for great tone. Steel blade construction and tuned magnetic field ensures you don't have to worry about pole alignment to get warm, full, perfectly balanced tone.

These pickups are truly pro-level and have internal shielding to block radiated noise from studio equipment and stage lighting. They are passive and will work with your current electronics in most basses but are also amazing when installed with an on-board preamp. These split coil pickups are hum-cancelling and are sealed to be sweat-proof while also eliminating microphonics. Plus, because they don't have exposed blades or poles, you don't risk that horrible "dwink" noise of your string hitting magnetized metal.

P Soapbars can be installed in either neck or bridge position but they are designed to pair nicely with J Soapbar bridge (-T, Treble) pickups.

Specifications

• Coil Structure: Split P Hum-killing
• Cable Type: Shielded Coaxial Hot Core
• Magnetic Circuit: 2 types of carbon steel powered by ceramic (ferrite) magnets. Neck bass coil North and Bridge treble coil South

M34P Coil Specs

• DC Resistance: ~6.2KΩ
• Resonant Frequency: ~6.4KHz
• Sensing Width: 2.52" [64mm] Max - 1.89" [48mm] Min

M3 Soapbar

• 3.5" [88.9mm] Long, 1.5" [38.1mm] Wide, 0.74-0.84" [18.8-21.3mm] Thick + 0.11" [2.8mm] Cable
• 1 hole on bass end and 1 on treble end for your #4 pan head screws

Please Note: Bartolini does not supply screws with their pickups. If you require pickup screws, we carry them on our pickup screws page.

Click Here for Pickup Screws.