Bartolini X55CBJD-T 5-String X5 Candybar Classic Bass Dual In-Line Coil Bridge

Bartolini X55CBJD-T 5-String X5 Candybar Classic Bass Dual In-Line Coil Bridge

Classic Bass Candybars have a rich, deep voice with lots of high-end clarity and warmth with enhanced treble response and higher output than our Original Candybars. When you dig in, they are responsive and growly. When you pull back, they are clear and sweet. And they'll take any slapping and popping you want to give them. The Classic Bass series is popular with progressive, jazz, gospel, and metal musicians where articulation is critical.

Classic Bass Candybars are sweat-proof and won't make horrible noises when you touch them or hit them with the strings. They are passive and will work with your current electronics in most basses. These inline dual coil pickups are hum-cancelling even when only playing the neck or bridge pickup, so they are well suited for studio or stage.

Candybar shapes were made for refined Jazz bass builders who wanted to avoid the routing hassles and busy look of standard J-Bass pickups. Available in versions for neck (Bass, -B) and bridge (Treble, -T).

Specifications

• Coil Structure: Dual Inline Hum-killing
• Cable Type: Shielded Coaxial Hot Core
• Magnetic Circuit: 2 types of carbon steel, brass, and copper powered by ceramic (ferrite) magnets projected for focused aperture. Opposite polarity for bass and treble coils for neck and bridge pickups

X55CBJD-B1 - Neck

• DC Resistance: ~10.3KΩ
• Resonant Frequency: ~5.1KHz
• Sensing Width: 3.31" [84mm] Max - 2.36" [60mm] Min

X55CBJD-T1 - Bridge

• DC Resistance: ~11.5KΩ
• Resonant Frequency: ~4.2KHz
• Sensing Width: 3.31" [84mm] Max - 2.36" [60mm] Min

X5 Candybar

• 4.7" [119.3mm] Long, 0.85" [21.6mm] Wide, 0.76-0.86" [19.3-21.8mm] Thick + 0.11" [2.8mm] Cable
• 1 hole on bass end and 1 on treble end for your #4 pan head screws

Please Note: Bartolini does not supply screws with their pickups. If you require pickup screws, we carry them on our pickup screws page.

Click Here for Pickup Screws.