Bartolini XXP25C-T 5-String P2 Soapbar Original Quad Coil Bridge

Bartolini XXP25C-T 5-String P2 Soapbar Original Quad Coil Bridge

Original Quads provide you with bottomless lows and low-mids along with tonal complexity for excellent bite and growl. They are full and warm for vintage tone, enhancing the natural voice of your bass. They can handle wide string spacing and produce clear, defined tone. The pickup is very much like our Original Soapbars, but it has 4 coils instead of 2.

The coils can be split in 2 different ways ? to inline pairs or as P and reverse P which requires special wiring. The 4 coils are packed into the shell and then fully shielded and sealed so they are sweat-proof and immune from invisible noise stage and studio equipment. The cables are shielded too.

Available in balanced versions for neck (Bass, -B) and bridge (Treble, -T).

Specifications

• Coil Structure: Quad Parallel Humbucking
• Cable Type: 4-Conductor Cable with shield and bare drain
• Magnetic Circuit: 3 types of Carbon steel and brass powered by ceramic (ferrite) magnets projected shallow for wide aperture and compensated for maximum sensing width. Neck coils South and Bridge coils North for both positions

XXP25C-B - Neck

• DC Resistance: ~2.4KΩ each inline coil pair
• Resonant Frequency: ~5.7KHz
• Sensing Width: 3.15" [80mm] Max - 2.52" [64mm] Min

XXP25C-T - Bridge

• DC Resistance: ~3.7KΩ each inline coil pair
• Resonant Frequency: ~4.5KHz
• Sensing Width: 3.15" [80mm] Max - 2.52" [64mm] Min

P2 Soapbar

• 4.24" [107.7mm] Long, 1.25" [31.8mm] Wide, 0.69-0.79" [17.5-20.1mm] Thick + 0.15" [3.8mm] Cable
• 1 hole on bass end and 1 on treble end for your #4 pan head screws

Please Note: Bartolini does not supply screws with their pickups. If you require pickup screws, we carry them on our pickup screws page.

Click Here for Pickup Screws.