Lusithand NFP Double Jazz Control Plate (Volume - Volume) (updated)

Lusithand NFP Double Jazz Control Plate

This is a direct replacement plate that will fit most Jazz basses. It's solderless and very easy to install, no need for opening holes for batteries as a single 9v sits perfectly in the cavity. The instruments need having the output Jack located on the body. It consists of 2x Volume potentiometers ( Neck and Bridge), 1x Active/ Passive switch, 2x Filters( Neck and Bridge). The Filters are push-pull to activate a boost on the resonant peak of each preamp.

Operation: 9v and 18v Current Draw: +- 2 mAh

Description

The Double NFP Jazzplate is just an easy way for Jazz bass players to have the Double NFP filter sound on their instruments in an easy and quick way to install.

The Double NFP Jazzplate is solderless and it should fit on most Jazz basses on the market without any modification to the routing cavity. Unlike the single version, the output Jack needs to be mounted to the instrument’s body, so, modifications to the instrument might be required.

The control plate keeps its traditional configuration of Neck Vol and Bridge Vol that is always in the circuit. It has a Passive/Active switch and 2x Filters, one per pickup. Each Filter acts as a second-order Lowpass filter with a resonant peak on its cutoff point (4khz) and the potentiometer allows you to sweep from anywhere between 150hz and its cutoff point of 4khz.

This is a great new way for you to get experimental with your instrument and stand out from the crowd and make your Tone, Your Tone.