Aguilar OBP-2 1-Pickup 2-Knob 1-Switch 2-Band Vol - Treb/Bass Stack - A/P Sw

We are not authorized to ship Aguilar products outside of the United States and Canada.

Control Configuration

1. Volume
2. Treble/Bass Stack
3. Active/Passive Switch

Description

The OBP-2 was designed to give bassists fat tone while being small enought fit into tight control cavities. Wire this preamp with one 9 volt battery and it will fit into just about any instrument. With +/-18dB of bass boost and cut at 40Hz and +/- 16dB of treble boost and cut at 6.5 kHz you have can emphasize just the right frequencies to make your bass sound great in any mix.

The Aguilar OBP-2 is compatible with most major manufacturer’s pickups, and its small size makes it an easy retrofit in almost any bass. Combining high headroom and low noise, the OBP-2 is unmatched in providing tonal flexibility while retaining the true character of any bass!

No modification is required for use with Active pickups such as EMG®, Warwick® MEC and other active pickups as we build the pre-wires in house and impedance match the controls for the pickups chosen whether active or passive.

Tonally these preamps are aggressive, clear, transparent and have emphasis with the low and low midrange being warm, and with the top end 'presence' like. These preamps do not have gain control onboard.

Use of 9v or 18v power is possible as we build the prewires in house to suit your power requirements. 18v grants an additional 6dB of headroom.

Technical Specifications

• Bass: +/- 18db @ 40Hz
• Treble: +/- 16dB @ 6.5 KHz
• Input Impedance: 1 Mega Ohm
• Output Impedance: 100 Ohm
• Battery life: Estimated 324 hours